Powerful 3-phase high pressure washer for effective cleaning of heavily soiled surfaces. Working pressure of 180 bar. 20 m high-pressure hose on hose reel with foldable crank. Axial pump with power transmission via a stable crankshaft with connecting rods and pistons that provide an extremely long service life. Built-in relief valve. Built-in water tank of 12 liters, prevents damage to the high-pressure pump when there is not enough water. Total stop system with delayed engine stop. Safety shutdown. Pressure regulation Suction of detergent, chemical injector. Stainless steel manometer for easy reading of the working pressure. Stainless steel chassis, durable and corrosion resistant. Equipped with shock absorbers that protect against damage to the high-pressure pump. 4 large wheels make it easy to transport. Parking brake. Practical holders for high-pressure gun and cleaning lance. Quick coupling system D12. Max water temperature 60°C.
Standard equipment: 20 m high-pressure hose on reel, high-pressure gun, flush tube with flat jet nozzle and flush tube with Tubokiller nozzle.

Band saw with hydraulically controlled lowering with adjustable speed for optimized cutting. By pressing "PUSH" on the regulator for the hydraulics, sawing starts and the saw bar goes down. By pressing "PULL" it stops, when the saw is finished the saw and also the cooling pump stop automatically. Capable of miter sawing 0-60° to the right and 0-45° to the left. The gearbox runs in an oil bath. Cast iron saw frame and vise. Safety switch on the blade guard and blade tension. Two speeds. Precision control of the blade with carbide lugs and adjustable bearings.

Open tool case with shock-resistant molded base and metal frame. Durable rubber-coated handle. Made of ballistic nylon construction. Included in Milwaukee's Packout modular storage system.

Mobile diesel heating fan for efficient drying of construction sites or heating of well-ventilated spaces. Stainless steel combustion chamber. With flame sensor, overheating protection and regulation equipment. Electrical connection 230 V. Supplied with 1.6 m connection cable. Protection class IPX4.
NOTE! Ensure good ventilation before use.

Battery charger with starting aid, suitable for vehicles with medium-sized petrol or diesel engines.

Plastic vacuum cleaner nozzle. With soft bristles that do not scratch delicate surfaces. Fits Ø 32 mm pipe. Suitable for both hard and soft floors. Snaps into place and sits firmly on the vacuum cleaner tube. Fits Nilfisk vacuum cleaners VP300, GD 930, VP930, Thor, VP600, GD5 and UZ934.

Belt sander with quiet and reliable 3-phase, 400 V induction motor. Tiltable sanding table. Ergonomic working height of 960 mm. Adjustable eye protection. Supplied with sanding stop and a zirconium-coated 60 grain sanding belt 75x2000 mm.

Hand and air hydraulic workshop press for smaller workshops and semi-professional workshops. Capacity of 20 tons. The press piston is controlled by air hydraulics, which is operated with a foot pedal or hand pump. Laser cut frame with industrial seals. Double speed pump. The hydraulic cylinder is movable laterally. The press table can be raised and lowered with a winch. Accessory box at the foot of the press.
Supplied with press mandrel set in 8 parts.
Contents:
Ø 30 mm, max 15 tons
Ø 25 mm, max 13 tons
Ø 22 mm, max 12 tons
Ø 20 mm, max 10 tons
Ø 18 mm, max 8 tons
Ø 16 mm, max 6 tons
Ø 12 mm, max 3 tons
Ø 10 mm, max 2 tons

Hand hydraulic junior press for car workshops and light industry. Foot-operated, compressed air-controlled rapid action of the press piston for quick and precise fixation of the workpiece. Laterally movable cylinder. Built-in manometer at comfortable eye level. Built-in safety valve protects against overload. Fully welded frame and press table in the highest quality steel ensure a long life. Removable pressure shoe for mounting various pressure devices. Incl. 2 benchmarks.

Compact impact screwdriver 18 V Li-Ion with carbon brushless motor that delivers 190 Nm of torque, 3600 rpm and 4900 strokes/min. Only 112mm long, suitable for applications in tight spaces. With 1/4" bit holder. Full metal gearbox. Easy to change bits with one hand. Overload protection for tool and battery. Flexible battery system that fits all Milwaukee M18 batteries. Reversible metal belt clip. LED lighting and battery indicator. < br> Supplied without batteries, charger and storage bag.

Charger and battery pack with 2 18 V 5.0 Ah Li-Ion batteries and charger. The charger is suitable for both the M12 and M18 series.

Petrol powered motor welder made for continuous operation. High no-load voltage gives the weld good ignition properties. Welds with the latest electrode types. Suitable for welding alloyed and unalloyed steel, stainless and for overlay welding. The generator is specially designed for the welding unit. Automatic speed control reduces the noise level when the generator is not in use. Standard package with welding cables 3 m included. The engines are equipped with an electric oil monitor. It is possible to get power out of the 230 volt socket during welding.

Pelardomkraft med härdad kropp som ger ökad livslängd och minskar risken för läckage. Arbetstemperatur från -20°C till +70°C.

Battery-powered dry and wet vacuum cleaner 18 V Li-Ion with blower function. Powerful motor with maximum air flow of 1300 l/min and suction power of 80 mbar. HEPA certified wet/dry filter with 99.97% for effective dust collection. Built-in storage space for accessories and vacuum cleaner hose. Waterproof switch. Spring hose that is up to 2 m long in the extendable position. Flexible battery system, fits all Milwaukee M18 batteries. Stackable drawer design.
Standard equipment: Washable filter, hose, narrow nozzle and wide nozzle.
Supplied without battery and charger.

(HTML text not available)

Compact and efficient circular saw 12 V Li-Ion with carbon brushless motor. 140 mm saw blade with a maximum cutting depth of 46 mm. Miter capacity 0-50°. Integrated dust blower keeps the saw line free of dust. Magnesium table for low weight and extra durability. LED lighting. Flexible battery system, fits all Milwaukee M12 batteries. 
Standard equipment: 140 mm HM blade and parallel fence.
Supplied without battery, charger and storage bag.

Kompakt högtryckstvätt för kallvatten. Max arbetstryck på 130 bar. Professionell 1-fasmaskin för hem och trädgård. Ventilhus i mässing och keramiskt belagda kolvar. Snabbkopplingssystem D10. Utrustad med start- och stoppautomatik. Praktisk förvaring av spolrör och pistol. 12 m högtrycksslang på slangvinda med infällbar vev. Robust chassi för enkel transport och hög stabilitet. Max vattentemperatur 60°C. 
Standardutrustning: Högtrycksslang 12 m, dirtkiller-munstycke, högtryckspistol och spolrör.

Reliable high-quality forklift truck. Strong hydraulics. Bogie wheels made of polyurethane with a small climbing wheel at the front to easily get under the pallet from the long side.

Manual band saw, ideal for cutting steel and metal. Saw bracket in cast iron. Gearbox in oil bath. Two saw speeds. Mechanical blade stretching. Quick-locking vice. Precision steering with carbide lugs and adjustable bearings. Stand and a saw blade included.

2-cylinder belt-driven compressor 3-phase, 400 V. 150 l air tank. The pulley on the compressor part has fan blades for good cooling. Low RPM. Protection class IP54. Equipped with wheels and handles for easy transport. The compressor is equipped with a pressure switch, manometer, safety valve, reduction valve and quick coupling. 3-phase glove not included.

Portable gas heater with electronic ignition. Powered by propane gas and equipped with overheating protection and tipping protection. Nozzle with strong oxygen supply makes combustion complete. Suitable for construction sites, workshop/farm buildings, sporting events, barns and factories. Supplied with hose and adapter.

Hörselkåpa med hjässbygel och inbyggt Li-Ion batteri. Utrustad med FM-radio med RDS. Bluetooth 5.2-teknik för anslutning till två externa Bluetooth-enheter, via Bluetooth MultiPoint Technology, som möjliggör handsfree-samtal och streaming. Nivåberoende medhörningsfunktion gör det möjligt att höra omgivningsljud och ökar situationsmedvetenheten. Push-to-listen (tryck-för-att-lyssna-funktion), hör ljud i omgivningen bättre genom ett enkelt knapptryck. Bullerreducerande bommikrofon, ger tydlig talöverföring i bullriga miljöer. WAP (Work Audio Profiles) erbjuder ett nytt sätt att justera ljudinställningarna så att det passar arbetsmiljön för att främja situationsmedvetenhet under olika förhållanden. Stödjer OTA (Over-the-air) uppdateringar av den inbyggda programvaran för att förlänga produktens livslängd. Stödjer Qualcomm aptX HD för extra bra ljudöverföring via Bluetooth. APS-funktion (Audio Pan Setting), panorering av ljudet för FM-radio eller strömmande ljud mellan vänster, höger eller mitten. Applikationen 3M Connected Equipment gör det möjligt att navigera via appen i headsetets meny och göra alla konfigurationer på ett enkelt och snabbt sätt. Appen erbjuder även snabb åtkomst till användarinstruktioner, FAQ och tekniska datablad. Appen laddas ner till telefonen från App Store eller Google Play. Kåpans funktioner kan också styras från kåpans knappar. Även försedd med multifunktionsknapp (välj mellan fördefinierade funktioner). Röst-guidad meny-system. Batteritid på upp till 78 timmar. Hörselkåpan laddas via USB-C-kontakt (USB-C laddkabel ingår ej). Headsetet stängs av automatiskt efter fyra timmars inaktivitet för att spara batteri. Delvis tillverkad av återvunnen plast. Utbytbara hygiensatser och kåpskal. Dämpningsvärde SNR 31 dB. 

Godkänd/Certifierad enligt: 
EN 352-1:2020

Saw table that fits most cutting and miter saws on the market. Lightweight aluminum construction, easy to transport on the job site. With a transport length of only 1.09 m, the work table fits in most cars. Extendable length up to 2.5 m. Supplied with mounting brackets and support with length stop.
Dimensions (LxWxH): 1093x740x860 mm.
Extendable length: 2542 mm .
Max load: 227 kg.
Weight: 14.0 kg.

Powerful nut driver 18 V Li-Ion with carbon brushless motor. 1/2" drive with friction ring. Extremely compact design, only 152 mm long and perfect for use in tight spaces. Loosening torque of up to 881 Nm and tightening torque of up to 745 Nm. Redlink Plus electronics that ensure maximum performance and protect the tool against overload and overheating Drive Control with four modes that provide better precision thanks to a range of preset levels of revolutions per minute.The fourth mode is a precision mode with automatic shutdown that prevents overtightening of bolts by limiting the tightening torque to max. 47 Nm. The same position when loosening applies maximum torque, as soon as the bolt is loosened, the speed is automatically reduced, which reduces the risk of the nut or bolt falling out of the socket. Auto shut-off function, tightens only 47 Nm to prevent overtightening in more delicate applications .Lighting with three LED lights.Flexible battery system that fits all Milwaukee M18 batteries.
Stackable HD box.
Supplied without battery and charger.

Compact and powerful drill driver 18 V Li-Ion with carbon brushless motor for longer operating time. Extra short model, total length of only 145 mm. 2-speed with high torque of 62 Nm. Drilling capacity in steel of 13 mm and in wood of 52 mm. 13 mm metal chuck. Battery indicator. Metal belt holder. LED lighting. Flexible battery system, fits all Milwaukee M18 batteries.
Standard equipment: 2 pcs 5.0 Ah Li-Ion batteries, charger, belt clip and storage bag.

Portable gas heater with electronic ignition. Powered by propane gas and equipped with overheating protection and tipping protection. Nozzle with strong oxygen supply makes combustion complete. Suitable for construction sites, workshop/farm buildings, sporting events, barns and factories. Supplied with hose and adapter.

Robust and strong drill driver 18 V Li-Ion with carbon brushless motor. Safety function that stops the engine in the event of an accidental stop. Ergonomic rubberized grip with narrow grip circumference. 13 mm quick chuck. Spindle lock for easy tool change. High and low gear. Stepless right and left movement with constant power. Electronic power control. Engine brake. Overload protection. Battery indicator. LED lighting with wide angle. Attached belt hook and wrist strap.
Standard equipment: Stackable storage bag.
Supplied without battery and charger.

Heat-conducting hose intended for 20 kW diesel heaters with chimney. If the diesel heater is placed outdoors, the hose is used to lead in the heat.

Barrel pump for full barrels. Rotor pump. Suitable for oil, kerosene and diesel oil. May not be used with water-based or corrosive chemicals. Delivered with barrel connection G 2" and drain hose.
Capacity: 0.3 l/rev.

P950 TURBO is Sacit® "best seller" optoelectronic helmet, characterised by the use of 4 darkening sensors and external controls.
Provided with the True Color system, which ensures a clean and clear vision, it enables the operator to distinguish easily the objects in the work area with a lower eye strain.
All regulations are external.
The external regulation allows to switch to the grinding modality without taking the helmet off.
Multi-regulation ergonomic headgear.
Powered by battery (CR2450 Li) + solar cells.
Replaceable batteries.
Suitable for PLASMA, MIG (GMAW), TIG (GTAW) >40A, ELECTRODE (SMAW), OXYGAS and GRINDING processes.

Encased hose reel made of steel. Equipped with return spring. Polyurethane hose that stays soft even at low temperatures. Swivel wall bracket. Max working pressure 20 Bar. Hose connection 3/8".
Dimensions (LxWxH): 377x194x312 mm.

Powerful 3-phase high pressure washer for effective cleaning of heavily soiled surfaces. Working pressure of 150 bar. 20 m high-pressure hose on hose reel with foldable crank. Axial pump with power transmission via a stable crankshaft with connecting rods and pistons that provide an extremely long service life. Built-in relief valve. Built-in water tank of 10 liters, prevents damage to the high-pressure pump when there is not enough water. Total stop system with delayed engine stop. Safety shutdown. Pressure regulation Suction of detergent, chemical injector. Stainless steel manometer for easy reading of the working pressure. Robust chassis molded in one piece. Equipped with shock absorbers that protect against damage to the high-pressure pump. 4 large wheels make it easy to transport. Parking brake. Practical holders for high-pressure gun and cleaning lance. Quick coupling system D12. Max water temperature 60°C.
Standard equipment: 20 m high-pressure hose on reel, high-pressure gun, spray pipe with flat jet nozzle and spray pipe with dirtkiller nozzle.

Compact combi scrubber with 24 V battery operation, for daily cleaning in, for example, office environments, shops, hotels, schools, hospitals and workshops. Productive and powerful suction motor ensures a perfect cleaning result and a dry floor. Cutting width of 430 mm. Ergonomic handle with touch points, OneTouch button and guiding symbols make the machine easy to handle and use for new users. The cleaning settings can be changed while cleaning is in progress using three simple buttons on the control panel. Low noise level with Nilfisk SilenTech technology, reduces the noise level from 65 dB(A) all the way down to 60 dB(A) during quiet cleaning. Thanks to the curved, lightweight squeegee, the floor is always completely dry. Easy cleaning of the scraper on the suction squeegee. Easy replacement of the scrub brush. Can be used with either scrub brush or scrub pad. Dosing system for cleaning agents gives the user the option to clean with water only and only add cleaning agents when needed (0.25-2.0%). Flexible dispensing hose with flow control. Coarse filter in the dirty water tank. Protection class IPX4. Up to 4 hours of continuous scrubbing and drying on a fully charged battery, and up to 100 minutes before refilling with clean water.
Standard equipment: 2 pcs 12 V, 76 Ah GEL MONOBLOC batteries, battery charger, scrub brush Ø 430 mm, disc holder Ø 432 mm, suction scraper blade, extension cable 2 m, filling hose and timer 24 V.

Powerful nut driver 18 V Li-Ion with carbon brushless motor. 1/2" drive with friction ring. Extremely compact design, only 152 mm long and perfect for use in tight spaces. Loosening torque of up to 881 Nm and tightening torque of up to 745 Nm. Redlink Plus electronics that ensure maximum performance and protect the tool against overload and overheating Drive Control with four modes that provide better precision thanks to a range of preset levels of revolutions and strokes per minute.The fourth mode is a precision mode with automatic shutdown that prevents over-tightening of bolts to a maximum of 47 Nm. The same position when loosening applies the maximum torque, as soon as the bolt is loosened, the speed is reduced, which reduces the risk of the nut or bolt falling out of the socket with three LED lights.Metal belt clip.Flexible battery system that fits all Milwaukee M18 batteries. 
Supplied without battery and charger.

Pallet jacks with setting with locking function. Extra large foot area that provides improved stability and also prevents the trestle from sinking into the ground. Locking system with safety pin. Supplied in pairs.
TÜV approved and GS certified.

Hammer drill 18 V Li-Ion with carbon brushless motor. Delivers 5.0 J of impact force with low 6.9 m/s² vibrations. Drills up to 10 Ø18 x 100 mm holes on an M18 High Output 5.5 Ah battery. 4-position operation. Autostop protects the user against kickback. Tools and battery are protected against overload, overheating and discharge. SDS-plus mount. Control the tool through Milwaukee's ONE-KEY app via Bluetooth, check properties and save settings for specific application to easily and quickly adjust the tool. ONE-KEY also offers cloud-based inventory management platform that supports both location tracking and anti-theft. Compatible with Milwaukee M18 FPDDEXL vacuum cleaner.
Standard equipment: Side handle, metal depth stop, tool grease and stackable storage bag HD box.
Supplied without battery and charger.

Ear cover for mounting on a safety helmet. Equipped with noise-canceling microphone, Bluetooth technology and microphones for listening function. Bluetooth version 4.2, for connection to an external device for hands-free calls and streaming. Level-dependent function via microphones makes it possible to hear ambient sounds and pay attention to what is happening in the surroundings. Built-in FM radio with digital channel search and memory to store radio stations. Push-To-Listen function, the volume of the Bluetooth-connected device decreases and the possibility of hearing ambient sounds increases. Large buttons and voice-controlled menus for easy handling. Auto-pairing for easy connection to phone. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Battery life of up to 78 hours. Automatic shutdown after 4 hours of non-use to save battery. Low battery warning. Exchangeable covers in different colors are available as accessories. Attenuation value SNR 30 dB. Supplied with 2 x 1.5 V AA batteries, can also be used with rechargeable batteries.
Conforms to EN 352-3:2020

Powerful metal circular saw 18 V Li-Ion with brushless Powerstate motor. 150 mm saw blade with a maximum cutting depth of 57 mm. Tool-free depth adjustment and lowering lever. Advanced electronic protection against overload, overheating and discharge. Double switch prevents accidental start. Lightweight and compact design. Storing the Allen key on the machine. Integrated hook for hanging. LED lighting. Flexible battery system, fits all Milwaukee M18 batteries. 
Standard equipment: 150 mm metal blade and Allen key. 
Supplied without battery, charger and storage bag.

Interior cleaner for interior cleaning of cars, buses, trucks, boats, etc. Quickly and effectively dissolves ingrained dirt on rubber, plastic, vinyl, textile, etc. Leaves a completely grease-free and clean surface. Easy to apply.
pH concentrate: 10.5.
Dosage: 100%.

Air-driven rivet gun with rivet capacity up to 4.8 mm (aluminium). Container for rivet shank.